Fisher-Price T2065 - Manual (Page 11)

11
Swinging Motion, Soothing Sounds and Calming Vibrations
Swing Mode
• Place your child in the seat and secure properly.
Hint: You can turn the toy bar back when placing baby in the seat.
• Slide the main power switch ON. The power L.E.D. turns ON .
• Slide the swing speed/power switch ON .
• Give the seat a light push to start the swinging motion.
• Adjust the swing speed/power switch to the desired swing motion
setting.
Hints:
- After turning on power, this product may not swing unless
there is a child in the seat.
- As with most battery-power swings, a heavier child will reduce
the amount of swinging motion on all settings. In most cases,
the low setting works best for a smaller child while the higher
setting works best for a heavier child.
- If the low setting provides too much swinging motion for your
child, try placing one end of a blanket underneath your child
and let the other end of the blanket drape down while swinging.
- If swinging stops while using a lower setting, try a higher
setting. Give the seat a light push to start the swinging
motion again.
- Vibrations will not work in swing mode. To use calming
vibrations, follow the instructions in the previous section to
convert the product to seat mode.
• To turn off swinging, slide the swing speed/power switch off .
Music
• Slide the music/volume switch to ON with low volume , ON with
high volume or OFF .
Swing and Music
• To turn off swinging and music, slide the main power switch
OFF . The power L.E.D. turns OFF.
Main Power Switch Main Power Switch
Swing Speed/Power Switch Swing Speed/Power Switch
Music/Volume Switch Music/Volume Switch
Seat Mode
• Place your child in the seat and secure properly.
• Slide the vibration switch
ON or OFF .