FUJITSU C150-E140-03EN - Manual (Page 29)

M3091DC Image Scanner Operation Guide 2-5
2.3 Connection
This section explains how to connect the power cable and SCSI cable , and
also how to install the driver and other software.
2.3.1 Notes concerning Connection
When connecting cables, adhere to the following notes:
Fire or electric shock
−
Do not use AC adapter other than in the
package. Failure to do so could result in a
fire or cause the scanner to fall.
−
Before connecting or disconnecting a
device, turn off the power switch on the
personal computer, disconnect the power
plug from the outlet, then follow the written
procedure.
−
Use the scanner only with the indicated
supply voltage. Do not make a starburst
connection.
−
Do not hold the power cable or AC adapter
with moistened hands when connecting or
disconnecting it.
−
If the power plug is dusty, clean it with a
dry cloth.
−
Do not put anything heavy on the power
cable, and do not damage it by pulling,
forcibly bending, twisting, or heating. Do
not alter the power cable in any way.
−
Do not use a power cable if it is damaged or
the plug does not fit snugly into the outlet.