Foxconn 661M03 - Manual (Page 97)

Chapter 6 Special BIOS Functions
89
661M03 Series User Manual
Hard Disk Selection:
The hard disk selection menu will be displayed after you press the hotkey, listing
all the IDE HDDs installed in your system. You can switch the highlight bar to
make a selection and press <Enter> to confirm it.
Attention:
1. Make sure that you have selected a HDD before entering the main menu.
2. Make sure that the HDD you selected is ATA5 or higher. For HDDs lower
than ATA5, there will be a “No Support” message in the HDD list menu
listing beside the name of it.
3. Only one HDD can be operated at a time;
4. If you have assigned a password to the selected HDD, you will be prompted
to provide it before proceeding.