Fairchild CAM/CCD-4KCL.TDI User Manual

Page 19

Advertising
background image

CBR

This command allows you to change the Baud Rate. You will not see anything
on your monitor.
Here is a table of stored rates in the camera…Value Function

1 9600

2 19200

3 38400 (Default)

4 57600

5 115200

If you can’t resist changing the baud rate, select the appropriate single digit
number and hit enter.

LED

This command allows you to change the color. When selecting the option you
need to, enter the appropriate single digit number and hit enter. Your screen will
be blank during this command. You can input one of the following:

Value Function

0

Amber

1 Green
2 Red
3 Off

SAP

Store in Flash both correction memories, all registers and DAC values.

Value Function

Store all parameters

0 Default factory calibrate

1 User

2 User

The power on values will be the last saved from SAP (X).
RAP

Load from flash to camera. Recall all parameters

Value Function

0 Default factory calibration

1 User

2 User

SBS

Value Function

Set bit shift

0 10 bit

1 9 bit

2 8 bit

Fairchild Imaging • CAM/CCD 2KCL.TDI & CAM/CCD-4KCL.TDI Line Scan Camera User’s Manual • Rev C• 19 of 30

Advertising
This manual is related to the following products: