Fisher-Price H7185 - Manual (Page 7)

Upper Seat Tube
• Tip the assembly on it’s side on a flat surface.
• Fit the lower seat tube into the upper seat tube.
Lower Seat Tube
• First, fit an M5 lock nut into an opening in the short tube.
Make sure the rounded side of the lock nut faces out.
• Next, insert an M5 x 30 mm screw through the opening in the
opposite side of the short tube. Fully tighten the screw with
the Allen wrench.
• Turn the assembly upright.
• Fit the string (below the knot) of a toy through the slot in a
clip on the mobile.
• Pull down on the toy to be sure it is secure on the mobile.
• Repeat this procedure to assemble the other three toys to
the mobile.
Clip
Mobile
Toy
• First, fit an M5 lock nut into an opening in the upper seat tube.
Make sure the rounded side of the lock nut faces out.
• Next, insert an M5 x 30 mm screw through the opening in the
opposite side of the upper seat tube. Fully tighten the screw
with the Allen wrench.
Assembly
Clip
Slot
Rounded
Side Rounded
Side
7
13
14
15
16