Assembly – Fisher-Price L6349 User Manual

Page 12

Advertising

L6349pr-0921

• Locate the simulated

radio on the dash.

• Loosen two screws

on the underside of the dash to remove the simulated radio.
Set the screws aside.

• Remove the simulated radio from the dash.
• Loosen the screw in the battery compartment door.

Remove the battery compartment door.

• Insert three “AA” (LR6)

alkaline batteries.

Hint: We recommend using alkaline batteries for longer
battery life.
• Replace the battery compartment door and tighten the screw.
• Replace the simulated radio in the opening in the dash.
• Insert the two screws back into the underside of the dash and

tighten to secure the simulated radio.

• If the simulated radio begins to operate erratically, you may

need to reset the electronics. Remove the batteries from the
simulated radio, and then replace them.

• When sounds or lights from the simulated radio become faint

or stop, it’s time for an adult to change the batteries!

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always

remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of product in a fire.
The batteries may explode or leak.

• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,

as recommended.

• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to

be charged under adult supervision.

1.5V x 3

"AA" (LR6)

• Protect the environment by not disposing of this

product with household waste (2002/96/EC).
Check your local authority for recycling advice
and facilities (Europe only).

Battery Compartment Door

ASSEMBLY

DASH VIEW

• Before applying the labels, wipe the surface of the vehicle with

a clean, dry cloth to remove any dust or oils.

• Place the labels as shown in the illustration. For best results,

avoid repositioning a label once it has been applied to
the vehicle.

Advertising