Furuno NAVNET 1752C - Manual (Page 201)

5. CUSTOMIZING YOUR UNIT
5-29
5.8 Nav Data Display Setup
The nav data display provides various navigation data, fed from a navigator,
network equipment, etc. You may select the data to display and where to display
it, on the NAV DATA menu.
1. Press the [MENU] key to open the main menu.
2. Press the SYSTEM CONFIGURATION, SYSTEM SETUP, HOT PAGE & NAV
DISP SETUP and NAV DATA DISPLAY SETUP soft keys.
2
WPT POS
3
SOG
4
STW
5
COG
7
RANGE
8
DEPTH
9
TEMP
10
LOG TRIP
11
TTG
12
ETA
13
DATE
14
TIME
NAV
DATA
EDIT
RETURN
Positions
for full
screen
Positions
for half
screen
1
POSITION
6
BEARING
Nav data setup screen
3. Use the cursor pad to select a location
4. Press the EDIT soft key. The following display appears.
POSITION
WPT POSITION
SOG
STW
COG
BEARING
RANGE
DEPTH
TEMPERATURE
TRIP LOG
TIME TO GO
ETA
DATE
TIME
WIND ¤
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
DISPLAY DATA
Nav data setup window
5. Select the data to display and press the ENTER soft key or [ENTER] knob to
register your selection.
6. Press the RETURN soft key.
7. Press the [MENU] key to close the menu.