Furuno 2837S - Manual

www.furuno.co.jp
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
MARINE RADAR/ARPA
FAR-2137S/2837S/2137S-BB
Installation Manual
Comply with MSC.192(79)
TABLE OF CONTENTS
SAFETY INSTRUCTIONS....................... i
EQUIPMENT LISTS .............................. iii
SYSTEM CONFIGURATION .................. v
1. MOUNTING ..................................... 1-1
1.1 Antenna Unit ........................................ 1-1
1.2 Monitor Unit.......................................... 1-8
1.3 Power Supply Unit ............................. 1-12
1.4 Control Unit ........................................ 1-13
1.5 Processor Unit ................................... 1-18
2. WIRING ........................................... 2-1
2.1 Interconnection .................................... 2-1
2.2 Antenna Unit ........................................ 2-2
2.3 Monitor Unit.......................................... 2-7
2.4 Processor Unit ..................................... 2-8
2.5 Power Supply Unit ............................. 2-12
2.6 Changing AC Power Specification of
Processor Unit .................................. 2-12
3. SETTING AND ADJUSTMENT ....... 3-1
3.1 DIP Switch Setting ............................... 3-1
3.2 Initializing Tuning ................................. 3-2
3.3 Heading Alignment............................... 3-3
3.4 Adjustment Sweep Timing.................... 3-6
3.5 Suppressing Main Bang ....................... 3-7
3.6 Other Settings ...................................... 3-8
3.7 Dual Radar Display
(non IMO-type only) .......................... 3-16
4. INSTALLING OPTIONAL
EQUIPMENT........................................4-1
4.1 Gyro Converter GC-10 ......................... 4-1
4.2 Memory Card Interface Unit ................. 4-9
4.3 DVI-RGB Conversion Kit (for VDR
connection)........................................ 4-12
4.4 BNC Connector Converter ................. 4-15
4.5 Junction Box....................................... 4-16
5. INPUT/OUTPUT DATA ....................5-1
INSTALLATION MATERIALS,
ACCESSORIES, SPARE PARTS ....... A-1
OUTLINE DRAWINGS ....................... D-1
INTERCONNECTION DIAGRAM ....... S-1
Back