Furuno NAVNET 1752C - Manual (Page 30)

1. OPERATIONAL OVERVIEW
1-16
1.8 Function Keys
The function keys provide for one-touch call up of a desired function. The default
function key settings are as shown in the table below.
Default Setting, Key Label Function
Key
Radar Plotter Echosounder
#1 Heading line on/off,
HL Track on/off, TRK TLL output, TLL
#2 Rings on/off, RNG Edit mark/line, EML Clutter, CLT
#3 Echo trail, TRL Ruler, RUL Signal level, SLV
#4 Offcenter, SFT Add new waypoint,
ADD
Noise limiter, NL
#5 Radar source, RSR Waypoint
alphanumeric list,
ALP Picture advance, PA
1.8.1 Executing a function
1. Press the [HIDE/SHOW] key to replace the preset soft key labels with the
function key labels.
34 ° 22. 3456'N 359.9 °
M TRIP NU
080
°
22. 3456'E 19.9 kt 99.9 nm
BRIDGE
FISH
002WP
Function
keys
T
R
K
E
M
L
R
U
L
A
D
D
A
L
p
Plotter
16.0nm
.250/ 319.9
°
M .125nm
SP
H-UP
Function
keys
TARGET
+
359.9 ° R
0.24nm
H
L
R
N
G
T
R
L
S
F
T
R
S
R
Radar
Function keys
2. Press function key desired.
Note:
Function keys can be individually programmed for the radar, plotter and
sounder displays. For further details see the following:
Radar: paragraph 5.2.3
Plotter: paragraph 5.3.2
Sounder: paragraph 5.9.4