FUJITSU PRIMEQUEST 1000 Series C122-E119EN - Manual (Page 76)

Procedure for removing cable holders (Model 1740)
Remove the cable holders by using a Phillips screwdriver.
No. Description
(1) M5 screw
(2) Cable holder
(3) Phillips screwdriver
FIGURE A.4 Removing a cable holder (Model 1740)
Procedure for removing cable holders (Model 1640/Model 1624)
Remove the cable holders by using a Phillips screwdriver.
Before removing cable holders on the side of the door hinges, you need to remove the attached door.
PRIMEQUEST 1000 Series Hardware Installation Manual
APPENDIX A Racks
56 C122-H004-07EN