Flymo TWISTER 2700XV - Manual (Page 4)

Blow Tube & Shoulder Harness Assembly
A
Blow Tube Assembly
1. Attach the blow tube to the product as shown in Fig
A, ensuring it clicks securely into position.
Shoulder Harness Assembly
1. Attach the Shoulder Harness to the product as illustrated in Fig B.
2. Adjust the Shoulder Harness as required to ensure it is in
the most comfortable position. (C).
B C
Suction Tube Assembly
F1 F2
F3
1. Turn the product over and press the release catch on
the Blow Tube (E1).
2. Slide the catch away from the product (E2) and re-
move the Blow Tube from the product (E3).
E1
D
Converting from Blower to Suction
E2 E3
Suction Tube Assembly
1. Attach the two Suction Tube halves together as illus-
trated in Pic D. Ensure that the two halves click se-
curely into position.
IMPORTANT
When the Suction Tube halves are attached together,
this is a permanent fixture, they can not be disassem-
bled.
3. Press the release catch on the Impeller Guard (F1).
4. Release the wire hook (F2).
5. Turn the Impeller Guard anti-clockwise until it can be
removed (F3).