Fisher & Paykel OB60S9DE - Manual (Page 14)

12
Setting the clock and fi rst use
1 Ensure the power supply to
the oven is on.
4 Set the time by pressing the scroll
buttons. Holding the buttons down will
speed up the scrolling.
5 Press the select button to confirm.
The clock indicator will soon disappear
but the clock is now set.
2 Select the clock by
pressing the right
scroll button twice.
The clock indicator
will appear and the
colon will flash.
3 Press the select button
to confirm.
The display will flash
to indicate the clock is
ready to be set.
First use: conditioning the oven
It is important to condition your oven before using it for cooking and baking. Conditioning will
burn off any manufacturing residues and ensure that you get the best results right from the start.
1 Make sure you have set the clock.
2 Slide in the shelves and the grill tray.
See ‘Using your oven’ for instructions. If the sliding shelf supports are not already fitted, see ‘Care
and cleaning’ for instructions on fitting them.
3 Heat the oven for:
30 minutes at 200
o C using Bake then
15 minutes at 200 o C using Fan Grill
See ‘Using your oven’ for instructions.
There will be a distinctive smell while you are conditioning the oven.
This is normal, but make sure the kitchen is well ventilated during the conditioning.
Setting the clock
You will need to set the clock to make full use of your oven.