Meridian Audio 861 - Manual (Page 22)

18
Customising the 861
Reference Digital
Surround Controller
To change a DSP parameter
Make sure the menus are unlocked; see To unlock
the menus, page 16.
Press > or < (remote or under the front panel) until
the display shows the name of the parameter you
want to change.
For example: CD Depth +0.0
Press A or V (remote or under the front panel) to
change the value of the parameter.
As you change the value you will be able to hear the
effect on the sound, and the display will show the
current value. After a short delay the display will revert
to the normal display of DSP preset and volume.
•
•
•