FUNAI MBP5130/F7 - Manual (Page 32)

32
HDMI Audio Out Setting
When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the
specifications of the device to be connected. Refer to page 31. Normally, set it to “HDMI Multi(Normal)” so
that the unit automatically picks and outputs the best audio format suited to your connected device.
Device to be connected “HDMI Audio Out”
setting
Output HDMI audio signal
Device compatible with Dolby
Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD decoding HDMI Multi(Normal) Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS, or DTS-HD bitstream are
output from HDMI OUT jack. Make the
speaker settings on the connected AV
amplifier, etc.
Device compatible with 3 or more
channels of audio inputs (not
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD
compatible) HDMI Multi(LPCM) Multi-channel audio signals are output
from HDMI OUT jack. Make the speaker
settings with the speaker setting
items appear after you select “HDMI
Multi(LPCM)”.
HDMI connection to a TV and
digital audio connection (coaxial)
to an AV amplifier Audio Mute HDMI audio will be mute, and Dolby
Digital / DTS bitstream or LPCM will be
output from DIGITAL OUT jack depending
on “Digital Out” setting.
Note
• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and
bit length) maybe limited by the device that is connected.
• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In
connections with device such as this unit, audio signals are not output from HDMI OUT jack.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output
mode.
Digital Out Setting
When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the
audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.
Quick  HDMI Audio Out  Audio Mute  Digital Out
Bitstream* :
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®,
the corresponding core stream (Dolby Digital or DTS®) are output.
LPCM :
LPCM signal will be output from DIGITAL OUT jack.
• This setting is not effective when the HDMI audio signal is output.
Note
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set
“HDMI Audio Out” setting to “HDMI Multi(LPCM)”.