Furuno CSH-53 - Manual (Page 9)

1-1
CONTROL DESCRIPTION
Control Layout on Display Unit and Remote
Control Box
SUB PANEL 2
POWER TRANSDUCER
OFF ON
F1 F2 F3
- +
NORM E/S HIST RECALL MEMO
NARROW BOOST
SHOOT R/B
- + - +
RANGE GAIN
AUTO
TILT
WIDTH TILT
SCAN DEPTH
DIM CONT BRILL AUDIO
NET
COURSE
TARGET
LOCK
EVENT1 EVENT2
ESTI-
MATE1
ESTI-
MATE2
FISH OFF-
CENT
MAIN PANEL
SUB PANEL 1
PUSH-OPEN
1 2 3
DISP SELECT
DATA
EVENT TGT LOCK
ESTIMATE
1
NET COURSE
FISH
OFF-
CENT
TX
1 2 3 4
FUNCTION
5
–
+
RANGE
+
–
GAIN
SHOOT MEMO
NARROW RECALL
AUTO
AUTO
BOOST
TILT TRAIN
SCAN DEPTH
Each press displays water
temperature or depth at screen
center for about five seconds.
Turns on transmitter.
Shifts trackball mark.
Replays user preset settings.
Lit lamp shows current selection.
Displays net shooting mark.
Saves picture to memory card.
Sharpens width of Tx beam.
Replays a stored picture.
Varies the tilt angle of the
sounding beam between -5
°
and 60 ° .
Automatically tillts sounding
beam in 2
° steps within tilt
angle selected by WIDTH key.
Changes weight in vertical
direction at Tx.
Not used.
Adjusts receiver sensivity.
Selects display range.
Press to enter mark
shown on key or shift
screen center.
Raises/lowers the transducer.
: Raises transducer.
: Mid protrusion
: Full protrusion
Selects which display unit to
control in multiple display unit
installation.
Figure 1-1 Display unit and
remote control box