FilterStream V2400 User Manual

Page 14

Advertising
background image

14

H O W T O U S E

Remove your vacuum from the Charging Base

and slide the On/Off Switch to the “On” posi-
tion to operate. Slide the On/Off Switch to the
“Off” position between cleaning tasks to con-
serve power.

PICKING UP DRY DEBRIS
Use your vacuum for picking up dirt, dust, food
crumbs, etc. from counters, bare floors, rugs, auto-
mobile interiors, upholstered furniture, etc. After
dry pickups, empty and clean the Bowl and Foam
Filter before picking up liquid or wet spills.

Note: If using a HEPA Filter in place of the Foam

Filter, shake loose, or brush off any dust or debris
from the HEPA Filter if you notice any build-up.
DO NOT WASH OR RINSE THE HEPA FILTER, as
this may damage the HEPA material.

If the HEPA Filter accidentally gets wet from vac-

uuming wet spills, remove the HEPA Filter, pat it
dry with a paper towel, and allow it to thoroughly
air dry before next use.

PICKING UP LIQUIDS OR WET DEBRIS
Use your vacuum to pick up liquids or wet debris.
For ideal performance, we recommend the use of
the Foam Filter for liquid debris.
(a) For liquid pickups, insert the Squeegee into

the Bowl Nozzle and pull the Squeegee
through the liquid.

(b) Do not fill the Bowl beyond the end of the Pre-

Filter (about 9 oz. of liquid). If there is any liq-
uid in the Bowl, hold the Bowl Nozzle down to
avoid leakage. Tipping the Bowl Nozzle up
may cause the liquid to enter the fan area.

(c) After picking up per-

ishable spills (e.g.
milk, juice, etc.),
empty your vacuum’s
Bowl and Pre-Filter
immediately and thor-
oughly clean the
Bowl, Pre-Filter, Filter
Cover and Foam Filter
to prevent mold and
mildew from forming.

Advertising