FujiFilm PICTOGRAPHY 3500 - Manual (Page 32)

3. INSTALLATION
30
19. Select [Do not share this printer], and then click the [Next]
button.
The following appears.
20. Choose to print or not print a test page following the completion
of printer driver installation. Make your selection and click the
[Next] button.
The following appears.
21. Click the [Finish] button.
In certain cases, this will display the [Hardware Installation]
dialog box, prompting you as the figure below. If this message
appears, click
[Yes] to continue with the installation.
The file is copied.
22. If you chose to print the test page in step 20, the following screen
is displayed.
If the test page prints without problems, click the
[Yes] button.
Otherwise, click the [Troubleshoot] button and perform trouble-
shooting as instructed on-screen.
23. If the installation of the printer driver finishes without problems,
the icon for the new printer appears in the [Printers and Faxes]
folder window, as shown below.
24. Restart the computer.
This completes the installation of the printer driver.
3.5.2 For Network Printing
For network printing, install printer drivers on both server and client
computers by the following procedures:
• Precautions on the running of Windows NT 4.0 on the server
computer and Windows XP on the client computer.
When the printer driver is installed under the following condi-
tions, the Windows NT 4.0 printer driver may end up being in-
stalled on a machine running Windows XP. To avoid this, take
care to follow the installation procedures given below when in-
stalling printer drivers under these conditions.
[Conditions]
* The server computer is running Windows NT4.0.
* The client computers are running Windows XP. The Windows
XP PG3500 printer driver is not yet installed on the client com-
puters.