FUJITSU M8000 User Manual
Page 261
setroute(8)
System Administration
239
■
To reflect the routing information to XSCF, execute the applynetwork(8)
command. After reflected the information, use the rebootxscf(8) command to
reset XSCF to complete the setting.
■
The showroute(8) command can display the current routing information that is
set for the XSCF network.
EXAMPLES
EXAMPLE 1
Adds the routing of destination 192.168.1.0 and netmask 255.255.255.0 for
XSCF-LAN#0 on XSCF unit 0.
EXAMPLE 2
Adds the routing of destination 192.168.1.0 and gateway 192.168.1.1 for
XSCF-LAN#1 on XSCF unit 0.
EXAMPLE 3
Adds the routing of destination 192.168.1.0 and default netmask
(255.255.255.0) for XSCF-LAN#1 on XSCF unit 0.
EXAMPLE 4
Deletes the routing of destination 192.168.1.0 and default netmask
(255.255.255.0) from XSCF-LAN#1 on XSCF unit 0.
EXAMPLE 5
Adds the routing of destination 192.168.1. 4 for XSCF-LAN#1 on XSCF unit 0.
EXAMPLE 6
Deletes the routing of destination 192.168.1. 4 from XSCF-LAN#1 on XSCF
unit 0.
EXAMPLE 7
Adds routing information for the default gateway 192.168.10.1 for XSCF-
LAN#1 on XSCF unit 0.
XSCF>
setroute -c add -n 192.168.1.0 -m 255.255.255.0 xscf#0-lan#0
XSCF>
setroute -c add -n 192.168.1.0 -g 192.168.1.1 xscf#0-lan#1
XSCF>
setroute -c add -n 192.168.1.0 xscf#0-lan#1
XSCF>
setroute -c del -n 192.168.1.0 -m 255.255.255.0 xscf#0-lan#1
XSCF>
setroute -c add -n 192.168.1.4 xscf#0-lan#1
XSCF>
setroute -c del -n 192.168.1.4 xscf#0-lan#1
XSCF>
setroute -c add -n 0.0.0.0 -g 192.168.10.1 xscf#0-lan#1