FUJITSU M8000 - Manual (Page 113)

moveboard(8)
System Administration 91
NAME moveboard - move an eXtended System Board (XSB) from the current domain to
another
SYNOPSIS moveboard [ [-q] -{y|n}] [-f] [-v] [-c configure] -d domain_id xsb [ xsb...]
moveboard [ [-q] -{y|n}] [-f] [-v] -c assign -d domain_id xsb [ xsb...]
moveboard [ [-q] -{y|n}] [-f] [-v] -c reserve -d domain_id xsb [ xsb...]
moveboard -h
DESCRIPTION The moveboard(8) command disconnects an XSB from the current domain and,
based on the domain component list (DCL), assigns it to, or configures it in, the
specified domain.
The moveboard(8) command is not available on the M3000 server.
One of the following movement methods can be specified:
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
configure Disconnects a configured XSB from its domain configuration and
configures it into the specified destination domain configuration.
The incorporated XSB can be accessed from the Solaris OS.
assign Disconnects a configured XSB from its domain configuration and
assigns it to the specified destination domain configuration. The
assigned XSB is reserved for the specified domain and cannot be
configured in or assigned to other domains. The assigned system
board is configured in the domain by reboot the domain or
execution of the addboard(8) command with "-c configure".
reserve Reserves disconnection of the specified XSB from the domain
configuration of the move source, and reserves assignment of the
XSB to the domain configuration of the move destination. The
XSB is assigned to the domain configuration of the move
destination when the domain power of the move source is turned
off or rebooted. The XSB is subsequently incorporated when the
domain power of the move destination is turned on or rebooted.
platadm Can run this command for all domains.
domainadm Can run this command only for your managed domains.
Note – You must have the domainadm privileges for both of
source domain and destination domain to run moveboard(8)
command.