FUJITSU M8000 - Manual (Page 329)

showcod(8)
System Administration 307
NAME showcod - display Capacity on Demand (COD) configuration information
SYNOPSIS showcod [-v] [-d domain_id]
showcod -h
DESCRIPTION showcod (8) displays the COD information which includes the headroom amount,
number of installed COD right-to-use (RTU) licenses, the number of COD RTU
licenses reserved for domains, and the Chassis Hostid.
The showcod(8) command is not supported on the M3000 server.
When used without arguments it displays the current COD information.
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXAMPLES EXAMPLE 1 Displaying All COD Information
The output shown is what you would see if you had domainadm, domainop, or
domainmgr
privileges for Domain 1.
EXAMPLE 2 Displaying All COD Information
platadm , platop
Can execute the command for all domains.
domainadm , domainmgr, domainop
Can execute the command only for accessible domains.
-d domain_id Domain identifier. domain_id can be 0–23 depending on
system configuration.
-h Displays usage statement.
When used with other options or operands, an error
occurs.
-v Specifies verbose output.
XSCF> showcod
PROC RTUs reserved for domain 1 : 0