FUJITSU M8000 - Manual (Page 373)

showenvironment(8)
System Administration 351
NAME showenvironment - display the airflow volume, intake air temperature and
humidity, temperature sensor, voltage sensor, fan speed, and power consumption
information in the server
SYNOPSIS showenvironment [-M] [ type]
showenvironment -h
DESCRIPTION showenvironment (8) command displays the information listed below.
The following types of the information are displayed:
Privileges You must have one of the following privileges to run this command:
useradm , platadm, platop, fieldeng
Refer to setprivileges(8) for more information.
Airflow volume
information Volume of air exhausted from the server
Environment
information Intake temperature and humidity of the system
Humidity can be checked in the M8000/M9000 servers.
Temperature
information Intake temperature of the system and exhaust temperature of
each component
You can check the exhaust temperature of the following
components.
M3000 server motherboard unit(MBU_A), CPU
M4000/M5000 servers CPU module(CPUM), I/O
unit(IOU)
M8000/M9000 servers CPU/memory board unit(CMU),
CPU module(CPUM), crossbar
unit(XBU_B)
Voltage
information Voltage sensor value
Fan speed
information Fan rotational state and revolutions per unit of time
Power
consumption
information Maximum and actual power consumption values
The power consumption information is displayed on the M3000/
M4000/M5000 servers.