FUJITSU M8000 - Manual (Page 455)

showsnmp(8)
System Administration 433
NAME showsnmp - display the configuration information and current status of the SNMP
agent
SYNOPSIS showsnmp
showsnmp -h
DESCRIPTION showsnmp (8) displays the configuration and information and current status of the
SNMP agent. This includes: agent status, port, system location, contact and
description, traphosts, SNMP version, and any enabled MIB modules.
Privileges You must have platadm or platop privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXAMPLES EXAMPLE 1 Displaying SNMP Information for a System That Has Not Been Set Up
EXAMPLE 2 Displaying SNMP Information for a Disabled System Set Up With SNMPv3
Trap Host
-h Displays usage statement.
XSCF> showsnmp
Agent Status: Disabled
Agent Port: 161
System Location: Unknown
System Contact: Unknown
System Description: Unknown
Trap Hosts: None
SNMP V1/V2c: None
Enabled MIB Modules: None
XSCF> showsnmp
Agent Status: Disabled
Agent Port: 161