FUJITSU fi-4530C - Manual (Page 21)

1.4 How to use the Scanner Driver
fi-4530C Image Scanner Operator’s Guide 15
BASIC SCANNER OPERATIONS
1
■ FUJITSU ISIS Scanner Driver
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi
series by using application software that complies with The ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using
this driver software.
The procedure may vary depending on your application. If you use an application other than
QuickScan, please refer to its Guide or Help for further information.
1. Procedure for Basic Scanning Operation
1) Startup the application.
From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].
2) Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
3) Select fi-4530C, then click the [OK] button.
4) Select [Scan] - [New Batch] on the menu bar.