Fisher-Price TOT ROD R2510 - Manual (Page 10)

R2510pr-0920 10
• Fit the remaining lock nut onto the end of the steering column.
• Tighten the lock nut with the assembly tool.
Lock Nut
• “Snap” the steering wheel cap into the center of the
steering wheel.
Steering
Wheel Cap
End of Steering Column
10
11
ASSEMBLY
• First, “snap” the front of the seat to the vehicle A .
• Next, “snap” the four tabs near the back of the seat into the
matching slots in the vehicle B .
• Position both seat belts so that the fasteners face each other,
as shown.
• Insert the T-loop end of each seat belt through the slot in each
side of the seat.
• Pull up on the seat belts to be sure they are secure to the seat.
T-Loops
Seat Belt
Fasteners
12
13
B
SIDE VIEW
A