Field Controls FC-1400 - Manual (Page 4)

M AINTENANCE :
The media filter MUST be replaced periodically. The
reason is to maintain appliance operating efficiency
by minimizing pressure drop through the HVAC
system. The frequency of filter media replacement
depends on the operational environment. The need
for replacement is easily determined by a visual
inspection. Note: For optimum performance, replace
the media filter every 6 to 12 months.
M
EDIA F ILTER R EPLACEMENT P ROCEDURE :
1. Turn off electrical power to the HVAC system.
2. Remove the filter cabinet access panel.
Note: “AIR FLOW” directional arrow, located on
existing media filter (Figure 6).
3. Remove the existing filter media.
4. Remove the new media filter from the plastic bag.
Tip: Re-use plastic bag to discard the used
media filter.
5. Check media filter directional arrow (→) ! The
directional arrow MUST point in the direction of
air flow.
Tip:
Write the installation date on media filter
next to directional arrow for future filter
replacement reference.
6. Install the new media filter.
7. Install the filter cabinet access panel.
8. Turn on electrical power to the HVAC system.
R
EPLACEMENT P ARTS L IST :
Air cleaner Model Replacement filter size
Replacement filter
part number
Number of filters per carton
FC - 1400 16 x 25 x 5 46568500 3
FC - 2000 20 x 25 x 5 46568600 3
P/N 46567000 11/08
Limited Warranty
Field Controls, L.L.C. warrants that the following Field Controls, L.L.C. products sold hereunder, shall be free from defects in material and workmanship
under normal use for eighteen (18) months from date of manufacturing by the consumer excepting the provisions numbered below.
Provisions:
1. Field Controls shall have no obligation in the event the customer is unable to provide receipt showing the date the customer purchased the
product(s) or accurate date code information.
2. The product must be properly installed, maintained and operated under normal conditions.
3. Field Controls shall not be liable for any consequential and incidental damages, resulting from failure of a Field Controls, L.L.C. product, failure to
deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Field Controls, L.L.C. and the
customer.
4. Field Controls, L.L.C. products are often intended for use in specific applications. Field Controls, L.L.C. makes no warranty if a Field Controls,
L.L.C. product is used in applications other than intended.
5. Field Controls, L.L.C. makes no warranty of any kind in regard to any other manufacturer’s products distributed by Field Controls, L.L.C. Field
Controls, L.L.C. will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but
ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
Figure 7