FUJITSU FCN-087 - Manual


2mm pitch metric connectors
For pcb connection
Fcn-086 /087 series
n oVerVieW
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards
developed to support high-speed transmission/high density packaging of communication equipment,
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective.
Insertion connections are completely unnecessary since a polarity key is supported.
Plug contact has a four level sequence structure that makes connection/disconnection in an active state
possible. Terminals have a five level pin length to support various applications. New customized connectors
can be supported by freely combining the pin lengths of contacts and terminals.
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also
be shipped with shields pre-attached.
8 row products are also in the series. Consult factory for your requirements.
Fujitsu has developed a new high density power connector (25% denser) to improve operability.
A double press fit, which can connect two printed boards with one connector, greatly contributes to
improved mounting and decreasing cost. Consult factory for details.