Furuno GP-1850D - Manual (Page 4)

ii
FOREWORD
....................................... iv
SYSTEM CONFIGURATION
....... v
1. OPERATIONAL OVERVIEW
1.1 Display Unit Controls ....................... 1-1
1.2 Remote Controller ........................... 1-2
1.3 Inserting Mini Chart Card................. 1-3
1.4 Turning the Power On/Off ................ 1-3
1.5 Adjusting Tone and Brilliance .......... 1-4
1.6 Displays ........................................... 1-4
1.7 Menu Operation, Soft Keys ............. 1-5
1.8 Demonstration Display .................... 1-6
2. PLOTTER DISPLAYS
2.1 Presentation Modes ......................... 2-1
2.2 Cursor .............................................. 2-2
2.3 Shifting the Display .......................... 2-2
2.4 Selecting Chart Scale/Range .......... 2-2
2.5 Mini Chart Cards .............................. 2-2
2.6 Navigation Data Display .................. 2-5
2.7 Steering Display .............................. 2-6
2.8 Highway Display .............................. 2-7
2.9 Changing Operation Mode .............. 2-8
2.10 Navigation Trip Distance .................. 2-8
3. TRACK
3.1 Displaying Track .............................. 3-1
3.2 Stopping/Restarting Plotting
of Track ............................................ 3-2
3.3 Changing Track Color ...................... 3-2
3.4 Track Plotting Method, Interval ........ 3-2
3.5 Changing Track Memory Capacity .. 3-3
3.6 Erasing All Track .............................. 3-4
4. MARK
4.1 Entering Marks ................................ 4-1
4.2 Changing Mark Attributes ................ 4-2
4.3 Changing Mark Size ........................ 4-3
4.4 Erasing Marks .................................. 4-3
4.5 Displaying Track and Mark Points ... 4-3
5. WAYPOINTS
5.1 Entering Waypoints .......................... 5-1
5.2 Erasing Individual Waypoints ......... 5-4
5.3 Changing Waypoint Data ................. 5-4
5.4 Waypoint Mark Size ......................... 5-5
5.5 Changing Waypoint Position on the
Plotter Display ................................. 5-5
5.6 Searching Waypoints ....................... 5-5
6. ROUTES
6.1 Entering Routes ............................... 6-1
6.2 Connecting Routes .......................... 6-2
6.3 Inserting, Removing Waypoints ....... 6-2
6.4 Creating Track-based Routes .......... 6-4
6.5 Erasing Routes ................................ 6-5
7. NAVIGATION
7.1 Navigating to “Quick Points” ............ 7-1
7.2 Navigating to Waypoints
(waypoint list) ................................... 7-2
7.3 Navigating to Ports, Port Services ... 7-2
7.4 Following a Route ............................ 7-3
7.5 Cancelling Navigation ...................... 7-5
8. PLOTTER ALARMS
8.1 Introduction ...................................... 8-1
8.2 Audio Alarm On/Off .......................... 8-1
8.3 Arrival Alarm .................................... 8-1
8.4 Anchor Watch Alarm ........................ 8-2
8.5 XTE (Cross Track Error) Alarm ........ 8-2
8.6 Speed Alarm .................................... 8-3
8.7 Proximity Alarm ................................ 8-3
8.8 Alarm Information ............................ 8-4
9. SAVING AND LOADING
DATA TO/FROM MEMORY
CARD
9.1 Formatting Memory Cards ............... 9-1
9.2 Saving Data to Memory Card .......... 9-1
9.3 Loading Data from Memory Card .... 9-2
TABLE OF CONTENTS