Furuno FS-2570 - Manual (Page 46)

4-4
237
79
82
Dimensions of hanger
2. Attach all connectors to the bottom of the terminal unit.
PRINTER
COM1 COM2 K-BOARD
24VDC
Printer
Keyboard
For 24 VDC Not used.
Communication
unit
Terminal unit (IB-581), bottom view
3. Screw knobs to fix the terminal unit to the hanger.
4. Use the 17JE-573-10 to connect the NBDP port of the control unit and COM1 port of the
NBDP terminal unit.
Mounting of IB-583
1. Fix the hanger by using four tapping screws (supplied with option kit).
4- 7
282
240 0.5
28
80
0.5
Dimensions of IB-583
2. Tighten two knobs to the terminal unit loosely.
3. Mount the terminal unit to the hanger, and then fasten knobs.
4. Attach the earth wire 08S0087 to the earth terminal at the back of the terminal unit.
5. Use the cable assy 05S9351 to connect NBDP port on the control unit and DTE port on
the terminal unit.