Furuno GP-7000F - Manual (Page 47)

5-1
5. ROUTE
Often a trip from one place to another involves several course changes,
requiring a series of route points (waypoints) which you navigate to, one after
another. The sequence of waypoints leading to the ultimate destination is called
a route.
5.1 Entering Routes
You can store up to 200 routes and a route may consist of 35 points.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose PLOTTER and then push the [ENTER]
knob to show the PLOTTER menu.
TRACK
ROUTES
WAYPOINTS
MEMORY CARD
TRACK 11999/12000
WAYPOINTS 12/2000
Number of tracks and waypoints in use
Plotter menu
3. Rotate the [ENTER] knob to choose ROUTES and then push the [ENTER]
knob to show the route list.
Note:
The route list can also be shown by placing the cursor on a waypoint
and then pressing the ROUTE LIST soft key.
N NAME COMMENT LENGTH WAYPOINTS
FIND NEW EDIT RENAME COMMENT
PLOT DELETE REVERSE COLOR SEARCH
SEND RECEIVE CONNECT SELECT REPORT
ROUTE LIST
1 0001RT 00:10 MAY3104 1.901 nm 3
Route list
4. Rotate the [ENTER] knob to choose NEW at the bottom of screen and then
push the [ENTER] knob to show the new route menu.
The new route is automatically named with the youngest empty route number
and current date is used as the comment. Name and comment may be changed
if desired.