FUJITSU fi-5110EOX - Manual (Page 60)

44
■ Brightness (Black and White scanning only)
Sets the density for scanning black-and-white images.
Moving the slider control to the left will lighten the scanned image, while moving the
slider control to the right results in a darker scanned image.
* This setting item becomes available when "B&W" is currently selected at
"Color mode:" or when "Auto" is selected at "Color mode:" and black-and-
white documents are automatically recognized.
■ Setting for text only document.
Mark the checkbox as follows according to the type of your document.
•
Mark this checkbox when scanning documents containing printed or handwritten
text.
•
Unmark this checkbox when scanning documents containing photographs.
* This setting item becomes available when "Color" is currently selected at
"Color mode:" or when "Auto" is selected at "Color mode:" and color docu-
ments are automatically recognized.
■ Allow automatic blank page removal.
This setting automatically detects blank pages in the document stack and automatically
removes them from the output.
For example, when a stack of documents containing both two-sided and one-sided doc-
uments is scanned in Duplex mode, this feature removes only the back sides (i.e. blank
pages) of one-sided documents from the output images.
* No scanned images are output if all of the sheets in the document stack are rec-
ognized as blank pages.
■ Allow automatic image deskew.
This setting automatically detects skewed documents and correct them for the output
data. Up to +-5 degrees of skews can be corrected.
ATTENTION
Following documents may be accidentally recognized as blank pages:
•
Almost blank documents containing only a few characters
•
Document of only one color (including black) and without any patterns,
lines, or characters