Operation instructions – Foster Forno Micro+grill S1000 User Manual

Page 10

Advertising
background image

25

EN

2

Open the door; fix the oven to the cabinet with SCREW at the INSTALLATION HOLE

of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER to the INSTALLATION HOLE.

Operation Instructions

1. Clock Setting

When the microwave oven is electrified, the LED will display “0:00”, buzzer will ring once.

1) Press “ CLOCK “, the hour figures will flash.

2) Turn “

“ to adjust the hour figures, the input time should be within 0--23.

3) Press “ CLOCK “, the minute figures will flash.

4) Turn “

“ to adjust the minute figures, the input time should be within 0--59.

5) Press “ CLOCK “ to finish clock setting. “:” will flash, and the time will light.

Note:

1) If the clock is not set, it would not function when powered.

2) During the process of clock setting, if you press “STOP/CLEAR “, the oven will go back to

the previous status automatically.

2. Microwave Cooking.

Press “ MICRO./GRILL/COMBI. “ the LED will display “P100. Press “ MICRO./GRILL/COMBI. “

for times or turn “

“ to choose the power you want, and “P100”, “P80” “P50”, “P30” or “P10”

will display for each added press. Then press” START “ to confirm, and turn

“ to set cooking time from 0:05 to 95:00.Press “ START “ again to start cooking.

Example: If you want to use 80% microwave power to cook for 20 minutes, you can operate the

oven as the following steps.

1) Press “ MICRO./GRILL/COMBI. “ once, the screen display “P100”.

2) Press “ MICRO./GRILL/COMBI. “ once again or turn “

“ to choose 80% microwave power.

3) Press “ START “ to confirm, and the screen displays “P 80”.

4) Turn “

“ to adjust the cooking time until the oven displays “20:00”.

Advertising