Fisher VPC-R1 - Manual (Page 76)

CHECKING THE REMAINING NUMBER OF
IMAGES AND RECORDING TIME
For information about the card’s and internal memory’s capacity, please see
“Possible No. of Images/possible Shooting Time” on page 80.
œ To check the number of pictures or time remaining in the camera’s internal
memory, do not insert a memory card.
1
Set the main switch to [ Õ].
2
Open the lens cover.
œ Select any shooting mode other than [ Ø].
œ The remaining number of images appears
in the upper right of the LCD monitor (for
the still image and sequential shot shooting
modes).
œ The remaining video recording time appears
in the upper right of the LCD monitor (for
the video clip shooting mode).
œ The remaining number of images and video
clips differs depending on the resolution and
compression rate settings.
œ When the indication for the remaining
number of images or video clips becomes
0, no more images can be recorded. To
record more images, either replace the card
with another one, or save the recorded card
data (see page 57) and then erase the card
(see page 53).
œ Even when the indication for the remaining
number of images or video clips becomes
0, in some cases further recording may be
possible if you change the shooting mode,
lower the resolution (see page 37), and/or
increase the compression rate (see page
39).
<Still image shooting
mode>
<Sequential shot
shooting mode>
<Video clip shooting
mode>
18
18
1:05
71 English