Furuno CSH-5L/CSH-8L - Manual (Page 15)

1. OPERATIONAL OVERVIEW
1-5
1.3.4 Adjusting backlighting of control unit
1. Press the [MENU] key to open the menu.
2. Use the [RANGE] control to choose [MENU MODE] at the top of the screen.
3. Use the [GAIN] control to choose SYSTEM.
** SYSTEM MENU ** (RANGE CTRL: U/D, GAIN CTRL: L/R)
[MENU MODE] : SONAR SOUNDER MARKS SYSTEM
DIMMER : 10
DISP SELECT : TEMP CURRENT
HEADING ADJ : 0
°
AUTO RETRACT : OFF (OFF, 5-16kt) OFF
SPEED MESSAGE : ON OFF
EXT KP SYNC : OFF ON
AUTO TRAIN SPD : LOW HIGH
AUTO TILT SPD : LOW HIGH
UNIT : METERS FEET FATHOMS PA/BRA
SHIP'S SPD/BR : LOG/GYRO CURRENT NAV DATA GYRO+NAV
LOG PULSE : 200 400
PORT1 BAUDRATE : 19200 9600 4800 2400
PORT1 FORMAT : NMEA CIF
PORT2 BAUDRATE : 19200 9600 4800 2400
PORT2 FORMAT : NMEA CIF
NAV DATA : GPS LC DR ALL
COMBI SCALE : RIGHT LEFT
SUB TEXT INDI : OFF ON
LANGUAGE : ENGLISH (JAPANESE) ESPANOL DANSK
NEDERLND FRANCAIS ITALIANO (KOREAN)
NORSK
TEST : SINGLE CONTI PANEL COLOR
: PATTERN SIO ECHO-1 ECHO-2
ECHO-3 ECHO-4
SET TO DEFAULT : EXECUTE
PRESS [MENU] KEY TO EXIT
System menu
4. Use the [RANGE] control to choose DIMMER.
5. Operate the [GAIN] control adjust the dimmer. The setting range is 0-10.
Adjust the control clockwise to increase backlighting; counterclockwise to
decrease it.
6. Press the [MENU] key to close the menu.