Active smart refrigerators special features, Active smart special features, Fruit & vegetable bins and humidity control cover – Fisher & Paykel ActiveSmart User Manual

Page 11: Ice trays and lid, Door alarms, Fault alarms

Advertising
background image

11

US

Active Smart Special Features

Fruit & vegetable bins and humidity control cover

The vegetable bins feature a unique cover which provides two functions:

The humidity cover seals the bins and provides a humid microclimate to extend storage times of

fruits and vegetables.

The humidity cover prevents condensation, which forms at high humidities from dripping down

onto the fruit and vegetables. The ability to retain high humidity in the fruit and vegetable bin
may produce small amounts of water in the bottom of the fruit and vegetable bins. This can be
wiped out as required.

Ice trays and lid

To empty the ice cubes into the lid, hold the tray and lid together and twist to dislodge

the cubes.

Refill the ice tray with water, place lid containing ice cubes on top and store in the freezer.

Ice cubes are best stored in a closed container or plastic bag as they readily absorb odors and

tastes from other foods.

Door alarms

If the fresh food compartment door is left open the refrigerator will beep after 90 seconds.

If the freezer door is left open the refrigerator will beep after 60 seconds.

While either door remains open, subsequent beeps will sound every 30 seconds for 5 minutes.

A continuous alarm will sound if the door has been left open for 5 minutes or longer and the

interior light will turn off.

The alarm will stop when the door is closed.

Fault alarms

The Electronic Controller has many features to automatically compensate when some fault

conditions occur.

If the controller detects a fault from which it is unable to recover an alarm will sound.

When the fresh food compartment door is opened a fault code (specific pattern of lights) will

flash red and green on the Control panel to alert you to the fault. The audible alarm will stop
when any button is pressed but the lights will remain flashing.

If such a fault occurs, call your Fisher & Paykel Appliances Authorised Service Center immediately;

the fault code will help the service person find and remedy the cause of failure.

Advertising