Fantom Vacuum FM741 - Manual (Page 16)

Caution:
Be sure that seal on the HEPAfilter is inserted
towards the inside of the vacuum cleaner.
The filter cover should be correctly oriented
when it is reattached. Do not reattach it upside down.
3 Insert a new HEPAfilter with the seal
to the inside of the vacuum cleaner.
Reattach the filter cover.
Caution:
Do not attempt to wash the HEPAfilter.
Always replace the old filter with a new one.
2 Remove the HEPAfilter.
Under normal usage, the HEPA Filter will not require replacement;
however, vacuuming large amounts of extremely fine dust, powder or similar
material over a long period of time may decrease airflow performance through
the filter. If this occurs, it may become necessary to replace the HEPA
Filter. Only use genuine FANTOM replacement filters.
15
REPLACEMENT INSTRUCTIONS
REPLACING THE FILTER
Caution: Do not wash the air outlet filter and sub-filter in a washing machine, and do not
use any other equipment such as a hair dryer to dry it. Do not operate the vacuum
without the sub-filter. Be sure the filter is dry and properly installed. Failure to do
so could result in electrical shock, personal injury, or motor failure.
CLEANING THE SUB-FILTER
Clean the sub-filter when it becomes dirty.
Remove the dust compartment
(refer to page 8).
Remove the air inlet cover.
Remove the sub-filter from the vacuum cleaner.
Gently clean the sub-filter with water.
Make sure that it is completely dry and
then re-install it into the vacuum cleaner.
Replace the air inlet cover and the dust compartment.
1
2
3
4
1
and pull the filter cover away from the
vacuum cleaner.
1
Press the release button D at points
Seal
HEPA Filter
Filter Cover
1 1
1 1
2 2
2 2
1 1
Sub-Filter
Air Inlet
Cover