Warranty and disclaimer – FUJITSU SK-TSC-1125S User Manual

Page 3

Advertising
background image

SK-TSC-1125S User Guide

© Fujitsu Microelectronics Europe GmbH

- 3 -

Warranty and Disclaimer

The use of the deliverables (e.g. software, application examples, target boards, evaluation boards,
starter kits, schematics, engineering samples of IC’s etc.) is subject to the conditions of Fujitsu
Microelectronics Europe GmbH (“FME”) as set out in (i) the terms of the License Agreement and/or
the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the
technical descriptions and (iii) all accompanying written materials.

Please note that the deliverables are intended for and must only be used for reference in an
evaluation laboratory environment.

The software deliverables are provided on an as-is basis without charge and are subject to
alterations. It is the user’s obligation to fully test the software in its environment and to ensure proper
functionality, qualification and compliance with component specifications.

Regarding hardware deliverables, FME warrants that they will be free from defects in material and
workmanship under use and service as specified in the accompanying written materials for a duration
of 1 year from the date of receipt by the customer.

Should a hardware deliverable turn out to be defect, FME’s entire liability and the customer’s
exclusive remedy shall be, at FME´s sole discretion, either return of the purchase price and the
license fee, or replacement of the hardware deliverable or parts thereof, if the deliverable is returned
to FME in original packing and without further defects resulting from the customer’s use or the
transport. However, this warranty is excluded if the defect has resulted from an accident not
attributable to FME, or abuse or misapplication attributable to the customer or any other third party not
relating to FME or to unauthorised decompiling and/or reverse engineering and/or disassembling.

FME does not warrant that the deliverables do not infringe any third party intellectual property right
(IPR). In the event that the deliverables infringe a third party IPR it is the sole responsibility of the
customer to obtain necessary licenses to continue the usage of the deliverable.

In the event the software deliverables include the use of open source components, the provisions of
the governing open source license agreement shall apply with respect to such software deliverables.

To the maximum extent permitted by applicable law FME disclaims all other warranties, whether
express or implied, in particular, but not limited to, warranties of merchantability and fitness for a
particular purpose for which the deliverables are not designated.

To the maximum extent permitted by applicable law, FME’s liability is restricted to intention and gross
negligence. FME is not liable for consequential damages.

Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect.

The contents of this document are subject to change without a prior notice, thus contact FME about
the latest one.

This evaluation system must only be used for test applications

in an evaluation laboratory environment!

Advertising