FUNAI EWR10D5 - Manual (Page 36)

34
Recording
Settings for an external source (cont’d)
Before recording from an external source, see the instructions for the connection on page 33.
DVD-R DVD-R DVD-RW DVD-RW
VR
DVD-RW DVD-RW
Video
Recording from an external source
1. Turn on the TV and the unit and be sure to select the input
of the TV to which the unit is connected.
Refer to the table on page
13.
2. Hit [OPEN/CLOSE A] to open the disc tray. Place the disc
to record properly.
3. Hit [OPEN/CLOSE A] to close the disc tray.
4. Select the input of the unit which the external equipment is
connected. (L2 or L 1)
• To use the input jacks on the back of this unit, select “L 1” position by
pressing [0], [0], [ 1] on the remote control or [CH L / K] .
• To use the input jacks on the front of this unit, select “L2” position by
pressing [0], [0], [2] on the remote control or [CH L / K] .
5. Select a recording speed by hitting [REC SPEED].
Refer to “Recording speed” on page 24.
6. Hit [REC/OTR] on the unit to start
recording.
7. Press “Play” on the external source to record from.
8. Hit [STOP C] on the unit to stop recording.
This operation may take a while to be completed.
This operation may take a while to be recognized.
DISPLAY SETUP
TOP MENU MENU/LIST
REPEAT
CLEAR
1 2 3
4 5 6
7 8 9
SPACE
0
ENTER
CH
RETURN
.@/: ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
4
Setting a disc to protect
To prevent accidental recording, edit-
ing or erasing of the titles, you can
protect them from the Setting menu.
1
Hit [SETUP] in the stop
mode.
Easy Setting Menu or Advanced
Setting Menu will appear.
2
Using [K / L], select “Disc”.
Hit [ENTER].
Disc menu will appear.
3
Using [K / L], select “Disc
Protect OFF
➔ ON”. Hit
[ENTER].
Confirm window will appear.
4
Using [K / L], select “Yes”.
Hit [ENTER].
A disc will be protected.
This operation may take a
while to be completed.
Writing to Disc 90%
No
Yes
Disc Protect OFF ON
DVD-RW DVD-RW
VR
DISPLAY SETUP
TOP MENU MENU/LIST
CLEAR
7 8 9
SPACE
0
ENTER RETURN
{ B
K
L
1
2
3
4
Note
• The Disc Protect setting is avail-
able only for a DVD-RW disc
recorded in VR mode.
• You can select only Disc Protect
off when a protected disc is
inserted.
To cancel the disc protect:
• When you insert a disc protect-
ed with this unit, “Disc Protect
ON
→ OFF” will appear .
To reverse the protection for the
disc, select “Disc Protect ON
→
OFF” at step 3, then select “Yes”.
No
Yes
Disc Protect ON OFF
S-VIDEO VIDEO AUDIO L R
OPEN/CLOSE CH REV FWD STOP PLAY POWER
REC/OTR REC SPEED
6 5
2 3 4 8
XP SP LP
EP SLP SEP
E6720UD_ENSP.qx3 05.2.21 7:39 PM Page 34