Fluke STIK 1551A EX - Manual (Page 19)

Stik Thermometer
Maintenance
11
Logging Interval
Push C to enter the data edit mode. ENTER is ignored if presently logging data.
K Change the logging interval setting to the subsequent item in the list, cycling
from the last to the first.
L Change the logging interval setting to the previous item in the list, cycling from
the first to the last.
C Return to the corresponding menu item.
Send Logged Data
Push C to:
K or L Confirm or cancel the choice to send data.
C
Send or cancel data.
C is ignored if presently logging data.
Erase Logged Data
Push C to:
K or L Confirm or cancel the choice to erase logged data.
C
Erase or cancel data erase.
C is ignored if presently logging data.
Maintenance
Clean the Product
W Caution
To prevent possible damage to the product or to equipment
under test, do not use abrasive cleaners. They will damage the
case.
To clean the Product, use a cloth with a mild cleaning solution.
Battery Replacement
XW Warning
To prevent possible explosion, fire, or personal injury:
• Change the batteries only in areas that are not Ex-hazardous.
• Replace the batteries when the low battery indicator shows
to prevent incorrect measurements.
W Caution
To prevent possible damage to the Product or to equipment
under test:
• Remove batteries to prevent battery leakage and damage to
the Product if it is not used for an extended period.
• Be sure that the battery polarity is correct to prevent battery
leakage.