Fluke 115 User Manual

Digital multimeters, Introduction, Service information

background image


September 2006

©2006 Fluke Corporation. All rights reserved.


114, 115, 116, and 117

Digital Multimeters

Calibration Information




To avoid electric shock or injury, do not perform the performance tests or
calibration adjustment procedures unless qualified to do so.

The information provided in this document is for the use of qualified personnel

The 114, 115, 116, & 117 Calibration Information provides the information necessary to adjust and verify the
performance of the Fluke Models 114, 115, 115C, 116, 116C, 117, and 117C True RMS Multimeters (hereafter
known as the Meter). When specific models are noted in this manual, the “C” version is also included. For example,
when the listed model is 115, the instructions are applicable to the 115C as well.

The following information is included in this document:

Safety Information and International Electrical Symbols (page 2)

Specifications (page 3)

Testing the Fuse (page 5)

Replacing the Fuse and the Battery (page 6)

Cleaning (page 7)

Performance Tests (page 7)

Calibration Adjustment (page 12)

Replacement Parts and Accessories (page 17)

Complete Warranty (page 19)

See the 114, 115, 117 Users Manual or the 115C, 117C Users Manual or the 116 Users Manuals or the 116C Users
for complete operating instructions.

Service Information

To contact Fluke, call one of the following telephone numbers:

USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500

Or, visit Fluke's Web site at



To register your product, visit


This manual is related to the following products:

116, 117, 114