Furuno GP-1650WD - Manual (Page 22)

2. PLOTTER DISPLAYS
2-8
How to read the XTE indication
The black boat-shaped mark shows own
boat’s movement and direction, and the
amount to steer to return to course. Using
the figure shown on the previous page as an
example, you would steer right by 000.02
nautical miles to return to course. When this
mark is out of range of the XTE scale, the
mark color changes from black to yellow.
The range of the XTE scale can be set as
shown below.
Setting the range of the XTE scale
1. Press the EDIT XT-LMT soft key to
display the following window.
EDIT XTE LIMIT
0 . 1 n m
XTE range setting window
2. Use the cursor pad to select digit to
change.
3. Press appropriate alphanumeric key.
4. Press the [ENTER] key. To cancel entry,
press the CANCEL soft key instead of the
[ENTER] key.
Note that all digits may be cleared by
pressing the [CLEAR] key.
2.9 Highway Display
The highway display provides a graphic
presentation of ship’s course. It is useful for
monitoring XTE - the XTE scale shows
direction and amount in nautical miles to
steer to return to course. In the figure below,
for example, you would steer right by 0.02
nm to return to course.
Press the [XTE/HIWAY] key once or twice to
show the highway display.
DGPS 3D
EDIT
XT- LMT
X T E 0 . 0 2 n m
0.1nm 0.1nm
HIGHWAY
001WPT
BRG
RNG
SPD
CSE 87.8
9 4 . 6 °
1 . 8 8 n m
10.0 kt
WPT001
YUUKI
FISH01
Amount of XTE in nautical miles
Waypoint mark
& name
Waypoint
Own ship
XTE
scale
Bearing to waypoint
Course
Range to waypoint
Speed
Indicates the
direction to steer
(Right: green, Left: red)
Highway display