4 advanced features playback, Advanced playback, D advanced playback – FujiFilm 1400 Zoom User Manual
Page 23
45
4
This section introduces a range of functions that
you can access when the Mode switch is set to
“
D
”. The explanations below all presuppose
that the Mode switch is set to “
D
”.
If there is a power socket handy, use the special
AC Power Adapter AC-5V (sold separately) so
there is no need to worry about the batteries
running out during playback (
DC IN 5V socket
●
!
If your SmartMedia holds more than 1,000 recorded
frames, refer to page 14.
●
!
The shapes of the plug and socket-outlet depends
on the country of use.
44
5
When you have finished selecting the settings,
press the “MENU/ EXE” button to confirm the
settings. These settings are retained even when
the camera is switched off.
➀
Press the shutter button to take the picture.
➁
The photographed image appears on the
LCD monitor.
➂
To record the image, press the “MENU/ EXE”
button.
●
!
If you take the batteries out of the camera for a long
period or remove the batteries during setup, the
camera settings may all revert to the factory default
values.
●
!
If you are not satisfied with the resulting image,
press the “CANCEL / BACK” button to prevent the
image being recorded on the SmartMedia. Then take
the picture again.
6
4
Advanced
Features Playback
➀
➂
➁
C MANUAL MODE
D ADVANCED PLAYBACK