Fisher-Price BOUNCE N GO G4815 - Manual (Page 12)

12
32
• Position the post so that the lower bend is toward the front end of
the coupe.
• Insert the post into the column on the back of the coupe.
33
• Insert the #10 x 2 1 /
8
" bolt into the column on the back of the coupe.
• Tighten the bolt.
Hint: The handle/canopy assembly is designed to be removed for Pedal
Car use. Simply remove the #10 x 2
1 /
8
" bolt and the handle/canopy
assembly. Store the handle/canopy in a safe place for future use.
Replace the #10 x 2
1 /
8
" bolt into the column on the back end of the coupe.
Back View
Lower Bend
in Post
Column
Column
Assembly Label Decoration
Proper label application will help to keep the labels looking their
best! When applying labels, keep the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied
to the vehicle.
• After applying a label, rub the label firmly with a clean, dry cloth to
make sure the label is adhered to your vehicle. Start at the center of
a label, and smooth towards the outer edges to remove air bubbles.
Front View
Back View
1
3
2
Front