FUNAI IWF2706 - Manual (Page 27)

27
CHANGING THE SCREEN DISPLAY MODE
2 types of display mode can be selected in the digital
mode.
You can select your favorite display mode and enjoy
the program.
1
Display the menu screen.
• Press [MENU].
The following menu screen is displayed.
2
Select "DTV SET UP".
• Using [CH K/L], select "DTV SET UP".
• When you press [VOL X], the menu screen will
be displayed as below.
DTV DISPLAY [LETTERBOX]
DTVCC
D.S.T.[Daylight Saving]
[ON]
TIME ZONE [ALASKA]
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
1 2 3
4 5 6
7 8 9
0 +100 -/ENT
o
p
m n
MUTE SLEEP
AUDIO
MENU
INFO INPUT
SELECT
DTV/TV POWER
CH
VOL VOL
MENU
CH K / L
VOL X / Y
DTV
3
Select the display mode.
• Every time you press [VOL X/Y],
"LETTERBOX" and "ZOOM" will be switched
alternately.
[LETTERBOX]
Display the digital-supported program in full-
screen.
Black borders will spread in the upper and
lower screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left side of image will be cut off.
4 To exit the menu, press [MENU].
NOTE:
You may not switch the display mode depending on the pro-
gram.
D10-0
ZOOM LETTERBOX
D10-0
EN
OPTIONAL SETTINGS