Fisher PC-20S00M - Manual (Page 4)

4
QuickTips
■ The TV will automati-
cally select the correct
Antenna mode for the
type of signal you
connect.
■ TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).
Exception—When the
Video mode is
selected, the TV will
not automatically
switch off when signal
reception has stopped
for 15 minutes.
+ +
IN FROM
SAT.
CATV IN
OUT TO TV S-VIDEO
CH3
CH4
R- -L AUDIO VIDEO
R- -L AUDIO VIDEO
FROM ANT.
OUT TO TV.
IN
OUT
FROM ANT.
OUT TO TV.
IN
OUT
FROM ANT.
OUT TO TV.
IN
OUT
UHF/VHF/CATV
75Ω
+
FROM ANT.
OUT TO TV.
IN
OUT
UHF/VHF/CATV
75Ω
UHF/VHF/CATV
75Ω
UHF/VHF/CATV
75Ω
IN OUT
RECEIVER
VCR
Cable Box
TV BACK
❸
BASIC HOOKUP METHODS
Use one of these methods to connect a signal to your TV. Select 1a—if you have cable service
and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or indoor
antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your cable or
antenna directly to the TV if you don’t have any optional accessories.
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive cable
programs, even with equipment
which is capable of receiving
cable channels, the consumer
must subscribe to the cable
company’s service.
❷
➊
d
➊
b
➊
a
75 OHM Terminal
Use the 75 ohm terminal to connect a
VCR, cable, cable box, outdoor/indoor
antenna or satellite receiver directly to
the TV.
Cable with VCR and TV
Cable with Cable Box, VCR and TV
Satellite Dish with Receiver, VCR and TV
➊
c Outdoor or Indoor Antenna with VCR and TV
❷
❷
VCR
VCR
VCR
❷
TV BACK
TV BACK
TV BACK
❸