Fisher LNS-W10 User Manual

Lns-t10/lns-w10, Lcd projector lens replacement procedure

Advertising
background image

After the lens replacement (before attaching the top cabinet), check the following
things.
1. Check the lens is properly installed.
2. Check no wiring is tangled on the gear of the lens motor or other mechanical

parts.

3. Check no parts is missing, or no mounting part is lost.

LCD Projector
Lens Replacement Procedure

Model Number

1AA6P1P3841-- (IDEP)

LNS-T10/LNS-W10

Lens replacement should be performed by the qualified service
personnel.
It should be followed by this procedure precisely.
Before an attempt to replace the lens, confirm the model number
(both the LCD projector and the lens) and prepare the proper lens.
The lens cover is on the lens for protection. Be sure to remove the
lens cover before installation.
When installing or removing the lens, be careful not to stain,
scratch or damage the lens.
If you have any questions, contact the dealers.

Notes on Lens Replacement

Following parts are contained in the packing.

● LENS

● LIGHT-BLOCK SHEET (Spare)

1 piece
1 piece (Part No. 610 301 5040)

Notes on Lens Replacement

Parts List

Printed in Japan

Advertising
This manual is related to the following products: