FujiFilm A210 - Manual (Page 22)

43
Advanced Features
42
1
2
3
4
1 Turn the Mode switch to “w”.
2 Press the “MENU/OK” button to display the
menu screen.
Press “d” or “c” to select “i” PROTECT.
1 Press “a” or “b” to select “FRAME”, “SET ALL”
or “RESET ALL”.
2 Press “MENU/OK” button to confirm your
selection.
1 Press “d” or “c” to select the frame (file) to be
protected.
2 Press the “MENU/OK” button to protect the
frame (file) currently displayed.
To protect another frame (file), repeat steps 1 and
2. To finish protecting frames (files), press the
“BACK” button.
FRAME SET
Protection is a setting that prevents frames (files)
from being accidentally erased. However, the
“FORMAT” function erases all the frames (files),
including protected frames (files) (
➡P.48).
0 1 0 2
0 1 0 2
0 1 0 2
RESET ALL
Removes the protection from all the frames (files).
SET ALL
Protects all the frames (files).
FRAME
Protects or unprotects only the selected frame
(file).
i PROTECTING IMAGES: FRAME/SET ALL/RESET ALL
PLAYBACK MENU
0 1 0 2
1 Press “d” or “c” to select the protected frame
(file).
2 Press the “MENU/OK” button to unprotect the
displayed frame (file).
FRAME RESET
Press the “MENU/OK” button to protect all the
frames (files).
SET ALL
Press the “MENU/OK” button to unprotect all the
frames (files).
RESET ALL
◆
To stop the procedure mid-way
◆
If a large number of images are recorded in the xD-
Picture Card, protecting or unprotecting all the
frames may take some time.
If you want to shoot a picture or a movie during the
procedure, press the “BACK” button. To then return
to protecting or unprotecting all the frames, start the
procedure on P.42 from step
1 .