Fujitsu Siemens Computers Convertible Bump Case none - Manual (Page 3)

3
.
Figure 3. Notebook Configuration
Tablet Configuration
To use your notebook in tablet configuration:
1. Unzip the case and lay the system into the case base
2. Open your computer so that the display is in notebook
configuration (perpendicular to the keyboard).
3. Fold the top of the case down so the display can rotate
without interference. Rotate the screen and put the
system into tablet configuration. (Figures 4a-4c)
4. Close the case cover and zip up the wraparound zipper.
5. Undo the Velcro® flap securing the protective cover and
flip the cover over the back of the case.
6. Tuck the cover under the handstrap on the back of the
case while in use. There is a small piece of Velcro under
the handstrap to secure the cover when it is open.
Protective Cover
Case Base
B5FY-8301-01EN-00 convertible bump.fm Page 3 Thursday, August 23, 2007 3:01 PM