Fostex X-12 - Manual (Page 11)

11
Model X-12 Owner's Manual
Basic Operation
(playback)
You can play back the recorded Track 1.
Press the [REW] button to rewind the tape
to the beginning of the tape (counter "000").
Press the [PLAY] button to start playing back
the tape from the "000" position.
For playback of the sound recorded on the
various tracks (1 - 4), the
fader / [PAN] knobs
corresponding to each track number is used
i.e. track 1 playback sound by the channel 1
knob, the track 2 playback sound by the
channel 2 knob, and so on.
<CAUTION>
When monitoring the sound via headphones
for a long period of time, do not set the level
too high. Otherwise, your hearing may be
damaged.
For playback of tape recorded on a boom box
or cassette deck, the channel 1 and 2
faders
and [PAN] knobs will be used regardless to
whether the A side or B side is to be played
back.
Track 1
Track 2
Track 3
Track 4
3
3
3
2 1
1
2
3
Slowly raise the channel 1 playback level
fader for track 1, then adjust the sound
balance with the playback [PAN] knob.
The same as when recording, the headphone
volume will increase as the
[LINE OUT/PHONES]
knob is slowly raised.
The sound image can be moved left or right
by rotating the
[PAN] knob in either direction.
<CAUTION>
Be careful not to press the [REC] button
by mistake.
Note that the recording track is always in
the selected state.