Furuno 511 - Manual (Page 7)

1. OPERATION
5
Setting the rate of turn for FAST/SLOW tacking
The rate of turn is preset as 3º for SLOW and 20º for FAST. If you need to
change the value, do the following:
1. Press the [MENU] key to show the menu.
For Navpilot-511/520, press the [TURN/MENU] key to show the main menu.
2. Rotate the course control knob to select “SAIL BOAT PARAMETERS”, and
then press the course control knob to show the sailboat parameters menu.
3. Rotate the course control knob to select “RATE OF SLOW TACK”, and then
press the course control knob to circumscribe the current value with the
double rectangle.
4. Rotate the course control knob to set value, and then press the course
control knob.
5. Rotate the course control knob to select “RATE OF FAST TACK”, and then
press the course control knob to circumscribe the current value with the
double rectangle.
6. Rotate the course control knob to set value, and then press the course
control knob.
7. Press the [MENU] ([TURN/MENU] for Navpilot-511/520) key to close the
menu.