Fluke Network Device MedTester 5000C - Manual (Page 7)

M E D T E S T E R 5 0 0 0 C F I E L D U P G R A D E I N S T A L L A T I O N I N S T R U C T I O N S
5
IC Removal and Installation Description
There are two types of IC sockets which you may encounter—one that is plain,
and one that has a lever handle. ICs are removed or installed as follows:
Plain Socket IC Removal
•
Hook the IC removal tool under each end of the IC, and pull it out
of the socket, OR
•
Insert a small flat-bladed screwdriver under alternate ends, and
carefully pry them up until the IC comes out.
Plain Socket IC Installation
•
Press the IC into the socket firmly.
Lever Handle IC Socket Removal
•
Hold down the IC firmly with a finger, and
•
Pull the lever up. Remove the IC by hand.
Lever Handle IC Socket Insertion
•
Make sure the lever is up.
•
Insert the IC by hand.
•
Push the lever to one side to lock in the IC.